Tools
Quality metal roofing installation requires specialty tools to get the job done right. Whether its cutting, seaming or bending our metal panels, we offer top-quality metal roofing tools that work hard, make installation easier, and withstand real-life use on the job.
​
Hemming Tools
Drip Edge Hemming Tool
• Reinforced steel plates
• Ideal fit for 1.5” folded bends
• Makes uniform 18” bends
• Ergonomic handle
• Coated contact surfaces to protect metal panel finishes from marring or scratching
• For use on up to 22-gauge steel
• 18” w x 17” l x 1.5” lip
• 4.6 lbs
Single Handle Hemming Tool
• High-quality steel construction
• Low side hemming
• Zinc-Chromate Plated
• Rubber grip handle
• 1-1/2” depth in sizes 11.25”,
15.25”, 17.25”, 19” and 20”
Crimpers
7” Turn-Up Tool
Wide Handle Hemming Tool
• Zinc-chromate plated
• Rubber grip handle
• Tapered side reliefs
• 3/16” gap
• 1-3/4" turn-up depth
• 7/8” turn-down depth
• Available sizes: 2” x 7” and 2” x 8-1/2”
• High quality steel construction
• Zinc-chromate plated
• Parallel rubber grip handle
• 1/8" gap
• 1-1/2" depth
• Temperature resistant from
-90º to 200º+ F
• Can be used on panels up
to 23" wide
90º Hand-Crimper
180º Hand-Crimper
Modulation Clamp
5” Offset Seamer
• Steel with state-of-the-art ceramic finish
• Superior resistance to wear,
corrosion, heat and chemical
exposure
• Rates for 22 gauge steel
• Handles 28.5” fully opened
• 9” crimp area
• 7.4 lbs
• For use with 90º hand crimper to
prepare for roof seamer
• Steel with state-of-the-art ceramic finish
• Superior resistance to wear,
corrosion, heat and chemical
exposure
• Rates for 22 gauge steel
• Handles 28” fully opened
• 5” crimp area
• 5.1 lbs
• For use with standing seam panel • Dipped nylon-powder coating to
protect roof panel finish
• 6” x 11”
• 2.5 lbs
Nut Setter and Screw Driving Tools
• Offset handle provides extra leverage
• Light-weight aluminum blades
• Easily interchangeable blades
• Bends soft materials with ease
• 5” x 2” blades x 2-1/4” throat depth
• Also available in 9” and 15”
#2 Philips Driver Bit
#2 Square Driver Bit
Spring-Clip Hex Nut Setter
• 2-3/4”
• Combo #3 Philips/#2 Square
also available
• 1-5/16”
• Combo #3 Philips/#2 Square
also available
Snips
• Non-magnetic
• Pressure long spring clip
• Superior driving
• Reduces paint removal from
fastener head
• 1/4" standard
• 5/16” and 3/8” available
9-3/4” Compound Action Straight and Left Cut Aviation Snips
• Cuts left from tight curves to straight
• Cuts low carbon cold rolled steel
• Non-slip serrated jaw of tough molybdenum steel holds material firmly and uniformly spreads cutting force across blade edge
• Withstands strain of cutting heavy stock
• Spring-action for fast effortless feed
• Non-slip textured grips and safety latch
• 1-3/8” cut length
• .40 lbs
9-3/4” Compound Action Straight and Right Cut Aviation Snips
• Cuts right from tight curves to straight
• Cuts low carbon cold rolled steel
• Non-slip serrated jaw of tough
molybdenum steel holds material
firmly and uniformly spreads
cutting force across blade edge
• Withstands strain of cutting heavy stock
• Spring-action for fast, effortless feed
• Non-slip, textured grips and
safety latch
• 1-3/8” cut length
• .40 lbs
9-1/4” Metalmaster® Offset Straight and Left Cut Aviation Snips
• Cuts left and straight
• Offset blades keep hands clear of metal
• Molybdenum steel non-slip serrated
jaw for compound lever action
• Able to cut heavy stock and tight curves
• Spring-action allows for fast
effortless feed
• Non-slip textured grips and safety
latch for superior control
• Cuts low carbon cold rolled steel
• 1-1/4” cut length
• .40 lbs
9-1/4” Metalmaster® Offset Straight and Right Cut Aviation Snips
• Cuts right and straight
• Offset blades keep hands clear of metal
• Molybdenum steel non-slip
serrated jaw for compound
lever action
• Able to cut heavy stock and tight curves
• Spring-action allows for fast
effortless feed
• Non-slip textured grips and safety
latch for superior control
• Cuts low carbon cold rolled steel
• 1-1/4” cut length
• .40 lbs
14” Lightweight Aluminum Handle Tinner’s Snip
TurboShear® HD Cutting Tool Drill Attachment
• Sleek head design reduces
cutting effort
• Large, wide handle loops
comfortably fit all hand sizes,
including gloved hands
• Longer handle length and
rounded head design improve
cutting leverage
• Strong and durable lightweight
aluminum construction
• Easy and quick blade
replacement
• 3-1/4" Cut Length
• 1.4 lbs
• Fits corded/cordless drill you
already own
• Make fast, straight, curved or
square cuts
• Wide opening for high or low speeds
• Telescoping drill clamp adjusts to
length and width of drill sizes
• Clamp collar allows 360º rotation • Long-lasting carbon steel blades
• Can cut up to 18ga steel, 20ga
non-hardened carbon steel and
stainless steel, 14ga aluminum,
and .100” copper